EZNEC v. 5.0,
EZNEC+ v. 5.0
What's
New Since DOS EZNEC
Upgrading from EZNEC v. 3.0 or 4.0?
Click here
to see the new features.
Click on the image to the left to see a screen shot from
EZNEC v. 3.0. EZNEC v. 5.0 and EZNEC+ v. 5.0 are
similar, with added
features.
With
EZNEC
v. 5.0,
you can. . .
- Watch the
antenna change as you edit the wires, sources, or
loads
- Always see
which wires you're working on
- Select wires
directly in the View Antenna display
- See the 2D and
3D plots at the same time
For
example – See a skewed wire in the View Antenna display, or a
group
of
wires you want to modify? Simply click them, and they’ll be
highlighted
in
the View Antenna display and also selected in the Wires Window, ready
for
easy editing. To make things even easier, EZNEC v. 5.0
shows you the
wire
numbers in the View Antenna display, and which end is which.
New EZNEC
Features since DOS EZNEC
- Antenna Notes
– Save a text file with each description.
View or edit it at any time.
- New RLC Load
Type – Define and work with loads directly as
R, L, and C, in parallel, series, or “trap” (series
RL with parallel C)
connections. Optionally make the R change with frequency to simulate
skin effect or insulation loss.
- Average Gain
– A powerful feature to detect source placement
problems and determine ground or wire loss.
- Faster
Calculations – EZNEC v. 5.0
is
40% - 400% faster than DOS versions.
- Frequency/SWR
sweep information is saved with the
description, so you don’t have to re-enter it the next time
you work
with the same model.
- View Antenna
Display Wire Numbers – You can center them,
offset them, or turn them off.
- View Antenna
Display End 1 Markers – You choose the color
for the segment closest to end 1.
- Instantly
available, Context Sensitive Help – Full Windows
help system.
Manual available with two clicks. Press F1 to open help to the current
topic.
- Full Windows
Interface – Full Windows operation and user
interface.
- Segmentation
Check.
- Powerful
features to create helixes, loops, radials; and to move, copy, and
rotate wires. Automated loop resizing.
- Undo
and Redo changes.
- Many,
many, others. Click here to see additional features.
Please
Note:
EZNEC and EZNEC+ v. 5.0 do not function under Windows 95 and NT4.0. All other 32- and 64-bit
Windows operating systems are supported: 98, ME, 2000, and XP.
Go
directly to the secure order page*
* If
you order a download, please make a backup copy of
the downloaded file on some other
medium besides your primary hard drive. If you don't
have any way
to back up the
downloaded file (~5-6 MB), please order the CD
with or without
the download to protect
against loss of EZNEC in the event of a hard drive
failure.
General upgrade information
EZNEC
v. 5.0 Frequently
Asked Questions (FAQ)
System Requirements
Price:
Your prices to upgrade to EZNEC
and EZNEC+
are shown on the upgrade
notice you have received by email or mail.
Please email me if you haven't received your v. 5.0 upgrade notice. When you place your order, enter your customer ID (from the upgrade
notice), and make your EZNEC/EZNEC+
selection, the EZNEC
ordering
system will know to charge you the correct price.
Back to the home
page...
